Kenwood DPX-MP4070 EN - Manual (Page 17)

English | 17
Tuner features
Tuning
Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Select the band
Press the [FM+] or [AM–] button.
Each time the [FM+] button is pressed it switches
between the FM1, FM2, and FM3 bands.
3
Tune up or down band
Press the [
4] or [¢] button.
• During reception of stereo stations the "ST" indicator
is ON.
Function of remote
Direct Access Tuning
Entering the frequency and tuning.
1
Select the band
Press the [FM] or [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency
Desired frequency Desired frequency Press button
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
� � �
���
���
���
�
�
���
ST indicator
Frequency display
Band display Preset station number
AUTO indicator