Kenwood DPX-MP4070 EN - Manual (Page 15)

English | 15
Adjusting Clock
1 Select the clock display
Press the [DISP] button.
2 Enter clock adjustment mode
Press the [DISP] button for at least 1 second.
The ‡ indicator blinks.
3
Adjust the hours
Press the [FM+] or [AM–] button.
Adjust the minutes
Press the [
4] or [¢] button.
4 Exit clock adjustment mode
Press the [DISP] button.
User Illumination Color Setting
The Illumination Color by the adjustment of RGB
can arbitrarily set.
1 Enter the Illumination Color Select mode
Press the [COL] button.
"Illumi" is displayed.
Illumination Color Select
Setting the color of the display.
1
Enter the Illumination Color Select mode
Press the [COL] button.
"Illumi" is displayed.
2 Select the Illumination Color
Press the [COL] button.
Each time the button is pressed, the Illumination
Color switches as shown below:
Illumination Color Display Display Display
Scan of "Blue" to "Mint" "V.Color"
Blue "Blue"
Mars Red "Mars Red"
White "White"
Lavender "Lavender"
Muscat "Muscat"
Pink "Pink"
Sky Blue Sky Blue "Sky Blue" "Sky Blue"
Lime "Lime"
Violet "Violet"
Aqua Aqua "Aqua" "Aqua"
Orange Orange "Orange" "Orange"
Mint "Mint"
User Color "RX/GX/BX"
• "User Color" enables the color set in 'User Illumination
Color Setting' (page 15) to be recalled.
3 Exit the Illumination Color Select mode
Press the [COL] button for at least 1 second.
When operation stops for 10 seconds, the
Illumination Color at that time is registered and
the Illumination Color Select mode automatically
closes.
2 Select the Color for adjustment
Press the [
4] or [¢] button.
Each time the button is pressed, the colors that
can be adjusted switch as shown below:
Adjustment Color Adjustment Color Display Display Display
Red "R" is blinks
Green "G" is blinks
Blue "B" is blinks
3
Adjust the Color
Press the [FM+] or [AM–] button.
Each time the button is pressed, the intensity of
color changes as shown below:
Intensity of color Intensity of color Intensity of color Display Display Display
Turning off Turning off "X0"
Weak "X1"
… …
Dark "X4"
4
Exit the Illumination Color Select mode
Press the [COL] button for at least 1 second.
When operation stops for 10 seconds, the
Illumination Color at that time is determined and
the Illumination Color Select mode automatically
closes.