Kenwood DPX-MP4070 EN - Manual (Page 25)

English | 25
In Standby mode
Opening Demonstration
Setting the Demonstration when Power is turned
ON.
Display Display Display Setting Setting
"Open On" Demonstration is carried out when Power is
turned ON.
"Open Off" Demonstration is not carried out when Power
is turned ON.
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display Display Display Setting Setting
"BEEP On" Beep is heard. Beep is heard.
"BEEP Off" Beep canceled. Beep canceled.
In Standby mode
Equalizer mode
Setting the method of adjusting Equalizer types.
Display Display Display Setting Setting
"EQ EASY" The effects of Equalizer type can be adjusted
among 3 levels.
"EQ PRO" Equalizer types can be adjusted by Bass,
Middle, and Treble.
In Standby mode
Switching preout
Switching the preout between the rear and
subwoofer. (In subwoofer it outputs without
effect from the fader control.)
Display Display Display Setting Setting
"SWPRE R" Rear preout. Rear preout.
"SWPRE SW" Subwoofer preout. Subwoofer preout.
In Standby mode
Illumination Color Mode
Setting the Illumination Color Mode of your
display.
Display Display Display Setting Setting
"COL Sync" The color of your display changes from one
color to another during volume adjustment
and during Attenuator being ON.
"COL Fix" Fix the color set.
In Standby mode
Contrast Adjustment
Adjusting the display contrast.
Display and Setting Display and Setting Display and Setting
"CONT 1"
…
"CONT 6" (Original setting)
"CONT 6" (Original setting)
…
"CONT 11"