Konica Minolta 140 User Manual

Page 34

FOR OWNERS OF THE QUARTZ-DATE MODEL

• To save power, the camera automatically shuts down if the shutter is not

released in approximately 8 minutes.

• Under fluorescent or extremely bright lighting, or with backlit subjects, the

remote control may not operate or the effective distance may be reduced.

• The remote control mode will remain in effect after the picture has been taken.

Press the drive-mode button to reset the drive mode, or turn the camera off.

FOCUS LOCK IN REMOTE CONTROL MODE

Continued on next page.

1. Select remote-control mode using the

drive-mode button.

2. Place the subject in the focus frames and press the shutter-

release button partway down to confirm the focus; the green
focus lamp will glow and remain lit.

• It the focus lamp does not remain lit after pressing the shutter-release button

partway down, the focus was not locked. Repeat the procedure.

• To cancel the focus lock, press the shutter-release button partway down again

or press the zoom lever.

Focus lock can be used in Area AF or spot AF.

ADVANCED OPERATION