Konica Minolta 140 - Manual (Page 31)

61 60
FOR OWNERS OF THE QUARTZ-DATE MODEL
3. Press the adjust (ADJ) button or zoom lever
to change the blinking item.
• The numerals continues to change as long as the
button is held down.
• Pressing the W side of the zoom lever counts down,
the T side counts up.
CHANGING THE DATE FORMAT
1. Press the date button until “SEt” appears on
the data panel.
2. Press and hold the select (SEL) button for
more than 2 seconds until all items on the
date display blink.
Continued on next page.
ADVANCED OPERATION
4. Repeat steps 2 and 3 until all items in the
date and time display are correct.
5. Press the date button to set the date and
time.
• The camera will return to the shooting mode
automatically after five seconds. Pressing the date
button again or pressing the shutter-release button
partway down will also return the camera to the
shooting mode.
• Pressing the select (SEL) button until the date/time display stops blinking can
also set the calendar and clock.