Kenwood TK-2200 - Manual (Page 39)

31
ALL RESET MODE
At some point in time, you may desire to reset the transceiver
settings to their default values. This function will reset all
channels to their default frequencies and QT/ DQT, the VOX
function to its default status, and all keys to their default
functions.
To reset the transceiver:
2
1
1
With the transceiver power OFF, press
and hold the PTT switch, the Lock key,
and the Scan key while turning the
transceiver power ON.
Continue to hold the keys for 2 seconds,
until the LED lights orange.
Release the keys.
The keys must be released within 1 second after the LED lights
orange, otherwise All Reset Mode will cancel.
The transceiver announces “Confirm” and returns to normal
operation.
TK-2200/3200 E 01-33-10 04.7.16, 1:44 PM 31