Kenwood TK-2200 - Manual (Page 16)

8
I
NSTALLING THE
C
OVER OVER THE
S
PEAKER
/ M
ICROPHONE
J
ACKS
I
NSTALLING THE
O
PTIONAL
S
PEAKER
/ M
ICROPHONE
(
OR
H
EADSET
)
If you are not using a speaker/
microphone, install the cover over
the speaker/ microphone jacks
using the supplied 3 x 6 mm screw.
Note: To keep the transceiver
water resistant, you must cover the
speaker/ microphone jacks with the
supplied cover.
2
1
2
Attach the locking bracket using
the supplied 3 x 6 mm screw.
Note: The transceiver is not fully
water resistant while using the
speaker/ microphone.
Insert the speaker/ microphone
(or headset) plugs into the speaker/
microphone jacks.
Note: Always switch OFF the
transceiver power when installing
or removing a speaker/ microphone
or headset.
TK-2200/3200 E 01-33-10 04.7.16, 1:44 PM 8