Kenwood TK-2200 User Manual
Page 14
6
I
NSTALLING
/ R
EMOVING
THE
B
ATTERY
P
ACK
The battery pack is not charged at the factory; charge it
before use {pages 5 and 6}.
Average battery pack life (calculated using 5% transmit time,
5% receive time, and 90% standby time) is 18 hours when
using the dealer set Battery Save function, and 14 hours
when not using the Battery Save function.
◆ Do not short the battery terminals.
◆ Do not dispose of the battery by fire.
◆ Never attempt to remove the casing from the battery pack.
1
2
3
Align the battery pack with the
back of the transceiver, then
press the battery pack and
transceiver firmly together until
the release latch on the base of
the transceiver locks.
To remove the battery pack, lift
the safety catch on the base of
the transceiver, then press the
release latch underneath the
safety catch.
While pressing the release
latch, pull the battery pack
away from the transceiver.
TK-2200/3200 E 01-33-10
04.7.16, 1:43 PM
6