Kenwood TK-2200 - Manual (Page 11)

3
ORIENTATION
Antenna
(optional)
LED indicator
Indicates the transceiver
status. Lights red while
transmitting, green while
receiving, and flashes
red while the battery
power is low while
transmitting.
PTT (Push to
Talk) switch
Press and hold,
then speak into
the microphone
to transmit.
Lock key
Press and hold
to lock the
transceiver keys
{page 13}.
Scan key
Press to scan the
channels for a
signal or to remove
a channel from
scan {page 13}.
Speaker/
microphone
jacks
Battery pack
(KNB-29N)
Channel selector
Rotate to change the
operating channel
from 1 ~ 2 or 1 ~ 8.
Power switch/
Volume control
Turn clockwise to
switch the power ON
and counterclockwise
to switch the power
OFF. Rotate to adjust
the volume.
Note: The Lock and Scan keys can be reprogrammed {page 25}.
TK-2200/3200 E 01-33-10 04.7.16, 1:43 PM 3