Kenwood DDX7032M - Manual (Page 82)

82 DNX7320/DDX7032/DDX7032M
Audio Control
Audio Control Menu
Displays the Audio Control menu to set the sound
effect function of this unit.
1 Display the control screen of any source
Press several times until the control screen
appears.
2 Display the Audio Control menu
3 Select the Audio Control item
1
1 Switches to the selected Audio Control
screen.
Audio Control
You can adjust the front/rear and right/left audio
balance.
1 Display Audio Control screen
Touch in the "Audio
Control Menu" screen (page 82).
2 Set the each item
2
4
4
3 3
1
5
6
7
1 Moves to the "Audio Control 2" screen.
2 Adjust the front/back and left/right volume
around the touched area.
3 Adjusts the right and left volume balance.
4 Adjusts the front and rear volume balance.
5 Turns the Loudness control function On or
Off.
If turned "On", high and low tones are
automatically enhanced during low volume.
6 Displays the present source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
7 Returns to the "Audio Control Menu" screen.
8
9
10
11
8 Returns to the "Audio Control 1" screen.
9 Adjusts the volume of the present source
based on the difference level of original
volume.