Kenwood DDX7032M User Manual
Page 80
80
DNX7320/DDX7032/DDX7032M
7 Returns to "SETUP Memory" screen.
3
Memorize or recall the settings
When memorizing the Audio Setup and AV
Interface settings:
If settings have already been memorized, a
confirmation message appears. Touch
Yes
.
To cancel memorization, touch
No
.
When recalling the memorized settings:
Touching the screen displays a confirmation
message. Touch
Yes
. To cancel recalling,
touch
No
.
When clearing the currently memorized
settings:
Touching the screen displays a confirmation
message. Touch
Yes
. To cancel clearing,
touch
No
.
4
Quit memorization/recalling of settings
Setup Menu
EXT SW Setup
Setting up power specification of the external
device for which the power is controlled from
this unit.
1
Display the EXT SW SETUP screen
Touch
in the "SETUP
Menu" screen (page 60).
2
Perform EXT SW Setup
Setting EXT SW Control 1 (EXT SW1)
1
2
3
4
1 Sets the name of the external device. See
on how to enter the name.
2 Sets the power signal output mode.
(
EXT SW1: Pulse, EXT SW2: Level)
Pulse: Generates a single power signal
pulse.
Level: Continues output of high power
signal.
Sets to turn output on/off each time the
button on the EXT SW Control screen is
pressed.
3 Sets the Pulse signal output time.
Outputs 500ms when "1" is set. Increases
by 200ms with each step. Up to 100 steps
can be set.
4 Returns to the original screen.