Kenwood DDX7032M - Manual (Page 27)

English 27
Radio Listening
Various control screens appear in the Tuner Source mode.
• For the basic method of receiver button operations, refer to (page 10).
• Set the remote controller mode switch to "AUD" mode before starting operation, refer to
(page 86).
Functions While Displaying the Control
Screen
Switches to the source control screen to use
various functions.
5
8 8
6
10 11 12 13 9
7
1 2 3
4
14 15
16
17 20 18 19 21
1 Band display
2 Preset number
3 Frequency display
4 Radio station information display.
Type M/Type M2:
Selects the Program Service Name, Title &
Artist name, Station Name, Category Name
1/2, or Radio Text.
Type X/Type V
Station Name display.
5 Turns the Traffic Information function On or
Off.
See , (page 30).
6 Switches to the FM1/2/3 band.
7 Switches to the AM band.
8 Tunes in a station.
Use the (page 28) to change
the frequency switching.
9 Switches the button display.
p MONO: (Function of Type M/Type M2)
Selects the Monaural reception
mode. (Only when receiving the FM
broadcast)
CRSC: (Function of Type X/Type V)
Turns the CRSC function On or
Off. (Only when receiving the FM
broadcast.) The CRSC indicator is
displayed when the CRSC function
is On.
q Selects the Auto Memory mode.
(Refer to page 28 for the )
w Switches the Seek mode.
(Refer to page 28 for the )
e Switches the number of lines displayed in
the Information Display.
r Displays the Hands Free screen. (page 49)
t Turns the Local Seek function On or Off.
(Function of Type M/Type M2)
y When
P1 to P6 buttons appear, you
can recall the stations on memory.
For memory of broadcasting stations, refer
to (page 28) or Memory> (page 29).
u Sets a name to the station. See
Name> (page 31).
(Function of Type X/Type V)
i Searches station by program type. See
Next page 3