Kenwood DDX7032M - Manual (Page 73)

English 73
4 Register your security code
5 Reenter the security code
Reenter the same security code as that you
have entered in Step 3 for confirmation.
⁄
• If you enter a different security code, the screen returns
to Step 3 (for the first code entry).
6 Register the security code again
Now, your security code is registered.
If you press the Reset button or if you
disconnect your receiver from the battery after
the code registration, you need to enter the
registered security code.
If you have pressed the Reset button or if
you have disconnected the Receiver from
battery...
1 Enter the correct security code
You must enter the same security code as that
you have entered in Step 3.
2 Enter the security code
Now, you can use your Receiver.
⁄
• If you enter an incorrect security code, you cannot use
your Receiver for a while.
Incorrect entry count Receiver inoperable time
1 -
2 5 minutes
3 1 hour
4 or more 24 hours