KVH Industries TracVision C3 - Manual (Page 79)

Report Satellite Names
Function: report names for satellites A and B
Command: SATINSTALL
Response: SATINSTALL,,
Report Configured Satellite Names
Function: report names for all configured satellites
Command: SATLISTA
Response: SATLISTA,,...,
Report Valid Satellite B Selections
Function: report names for all valid satellite B selections for a
given satellite A selection
Command: SATLISTB,
Response: SATLISTB,,
...,
Install Satellite Pair
Function: installs satellites A and B as the satellite pair
Command: SATINSTALL,,
Response: If valid pair, echoes the input data
If invalid pair, returns error message
Configure Longitude of a User-configurable Satellite
Function: configures one of the user-configurable satellites
with the longitude provided
Command: SATCONFIG,USERX,YYY,Z,D,L
Response: If valid pair, echoes the input data
If invalid pair, returns error message
Where: X = 1 or 2
YYY = longitude (0-180)
Z = E (East) or W (West)
D = decoding type (0 = test, 1 = DSS-A,
2 = DSS-B, 3 = DVB)
L = LNB polarization (c = circular, l = linear)
E-8
A Guide to TracVision C3