Konica Minolta Di1610 - Manual (Page 74)

4.4 Adjusting the Image Density 4
Di1610/Di1610p 4-13
Ma
ki
ng Copi
es
Ch
apte
r 4
❍ Each press of the [Auto/Photo]
key changes the setting as
shown at the right.
If Text mode is selected,
“TEXT” is displayed.
If the Auto setting is selected,
“[A]” is displayed.
If Photo mode is selected,
“PHOTO” is displayed.
✎
Note
In the Photo mode, the Auto
setting cannot be selected.
3 If you want to adjust the image
density manually, press the [ ] or
[Ö ] key to select the desired
setting.
✎
Tip
The displays for manually
selected image densities are
shown at the right.
4 Make the other necessary settings.
❍ “Selecting the Paper” on page 4-4
❍ “Specifying the Zoom Ratio” on page 4-10
5 Using the 10-Key Pad, enter the number of copies to be made, and then press
the [Start] key.
[A]
Light (level -4)
(level -3)
(level -2)
(level -1)
Standard (level 0)
(level 1)
(level 2)
(level 3)
Dark (level 4)
Ц