Konica Minolta Di1610 - Manual (Page 54)

3.8 Loading Originals 3
Di1610/Di1610p 3-25
B
e
fo
re
Ma
ki
ng
C
o
pi
es
Chap
ter
3
Positioning a Sheet Original
Use the following procedure to position plain paper or an original that is not suitable
for use in the Auto Document Feeder.
1 Raise the Auto Document Feeder or Original Cover.
2 Place the original face down on
the Original Glass.
3 Position the original on the
Original Glass so that the corner of
the original aligns with the arrow in
the upper-left corner of the
Original Scales.
4 Gently lower the Auto Document Feeder or Original Cover.
5 Specify the desired copy settings.
❍ “Making Copies” on page 4-1
6 Press the [Start] key to start the copy cycle.