Konica Minolta Di1610 - Manual (Page 69)

4 4.2 Selecting the Paper
4-8 Di1610/Di1610p
Ma
ki
ng Copi
es
Ch
apte
r 4
8 Press the [Yes] key.
9 Using the 10-Key Pad, enter the
length (Y) of the paper.
✎
Note
The length can range from
140 mm (5-1/2) to 356 mm
(14).
✎
Tip
Enter the value by mm using
the 10-key Pad. Refer to the
conversion rate below.
1 inch = 25.4 mm
10 Press the [Yes] key.
11 Make the other necessary settings.
❍ “Specifying the Zoom Ratio” on page 4-10
❍ “Adjusting the Image Density” on page 4-12
12 Using the 10-Key Pad, enter the
number of copies to be made, and
then press the [Start] key.
✎
Tip
To change the number of
copies to be made, remove the
paper from the Bypass Tray and then reload it. Repeat steps 11 and 12.
Yes
140-356
Yes