Konftel G510-7276-00 - Manual (Page 101)

Programming Flash
Fonts and macros are being written to flash. Wait for the message to clear.
Ready
The printer is ready to print.
Reload printed pages in Tray
• Press to clear the message and continue processing the second side of the sheet.
• Press , and then press to cancel printing.
Remote Management Active
The printer is offline while it configures settings. Wait for the message to clear.
Remove paper from standard output bin
Try one or more of the following:
• Remove paper from the standard exit bin to clear the message and continue printing.
• Press to clear the message and continue printing.
Remove packaging material
Check for and remove any packaging materials from the toner cartridges.
Replace cartridge
Replace the toner cartridge, and then press to clear the message and continue printing.
Tray Empty
Try one or more of the following:
• Load the paper tray or other source with the correct paper type and size.
• Press , and then press to cancel the current job.
Tray Low
Load the paper tray or other source with the correct paper type and size.
Tray Missing
Insert the specified tray into the printer.
Unsupported USB device, please remove
Remove the unrecognized USB device.
Understanding printer messages
99