Konftel G510-7276-00 - Manual (Page 100)

Load single sheet feeder with
Try one or more of the following:
• Load the manual feeder with the correct paper type and size.
If no paper is in the feeder, load a sheet, and then press to clear the message and continue printing.
• Select the paper type and size to manually override the manual request.
• Press , and then press to cancel printing.
Load single sheet feeder with
Try one or more of the following:
• Load the manual feeder with the correct paper type and size.
If no paper is in the feeder, load a sheet of paper, and then press to clear the message and continue printing.
• Select the paper type and size to manually override the manual request.
• Press to clear the message and continue printing.
The printer manually overrides the manual request, and then paper prints from an automatic source.
• Press , and then press to cancel printing.
Load single sheet feeder with
Try one or more of the following:
• Load the manual feeder with the correct paper type and size.
If no paper is in the feeder, load a sheet, and then select to clear the message and continue printing.
• Press to clear the message and continue printing.
The printer manually overrides the manual request, and then paper prints from an automatic source.
• Press , and then press to cancel printing.
Output Bin Full
Try one or more of the following:
• Remove paper from the standard exit bin to clear the message and continue printing.
• Press to clear the message and continue printing.
Power Saver
The printer is saving power while it waits for the next print job.
• Send a job to print.
• Press to warm the printer to normal operating temperature. Afterwards, Ready appears.
Programming Code
The printer is receiving a file that is a code update. Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer off while this message appears on the display.
Understanding printer messages
98