Samsung SCH-3550 - Manual (Page 53)

♦
If the phone does not recognize the name, it prompts
for the name again.
♦
If the phone is unable to recognize the name after two
attempts, the following message displays: “Cannot
recognize name. Please check name.” The phone
returns to Standby mode automatically, and you can try
the call again later.
8QKEG &KCNKPI #EVKXCVKQP
Voice dialing is always active once you have programmed the
phone to accept voice dialing entries. Your phone is set from
the factory to place a voice dialing call when you press and
hold
. Then, just say the name into the phone after you
hear the voice prompt and the beep.
You can also initiate a voice dialing call by opening the flip,
when you select this option through the Main Menu.
To set this voice dialing option:
1. Press to display the Main Menu.
2. Press for Voice Dial.
3. Press for Set Active.
4. Press the scroll keys to toggle between options:
♦
SEND Only: Enables voice dialing by pressing and
holding .
♦
SEND / FLIP: Enables voice dialing by pressing and
holding , or by opening the flip.
5. When the desired option displays, press to save the
setting.