Kenwood HM-V655MP - Manual (Page 16)

Basic use method
16 EN
The volume
decreases The volume
increases
Example:
To select the CD input
1. Set the key to ON.
Pressing the key when the unit is ON turns it off (Standby mode
of power).
÷ Pressing the TUNER/band, CD 6, TAPE 2 3 or AUX key also turns
power on and starts playback (reception) of the corresponding input.
(One-touch operation)
÷ When the CD or TAPE input is selected while the corresponding disc or
tape has been loaded, it immediately starts to play.
2. Selecting the desired source.
÷ Pressing the TUNER/
band, CD 6, TAPE
2 3 or AUX key se-
lects the correspond-
ing input.
CD (CD-DA, MP3 file and VIDEO CD) *‡°
TAPE ¡
TUNER (Broadcasts) £
AUX (External input) [Adjusting the AUX input level r]
When CD (CD-DA) has been selected.
Volume display
3. Volume adjustment.
÷ The display shows a reference value.
Enhancement of bass
Enhancement
of bass
Muting the sound
temporarily
Listening through
headphone
The system is switched ON
or STANDBY
Tone adjustment
Basic use method
5281/16-20/EN 6/20/02, 3:45 PM 16