Konica Minolta IP-011 - Manual (Page 68)

Chapter 4 Control Panel Setup
IP-011 Printer Controller 4-5
● Printer Mode Basic Screen
When the Konica 7020 series +IP-011 system starts properly, the printer mode basic screen is displayed on the
LCD by pressing the [SCANNER/PRINTER] button.
● Printer Menu Screen
The following printer menu screen is displayed by pressing the [Setting] key on the printer mode
basic screen.
When the [SCANNER/PRINTER] button is pressed again, the LCD is changed to the copy mode
basic screen, and the normal copy settings becomes available.
[1. Setting]
The Printer Setting screen is displayed by pressing the [1] button. On the Printer Setting screen,
you can perform various settings related to the Printer Controller.
[2. Cancel Job]
You can cancel the print command currently being processed by pressing the [2] button.
[3. Detail Message]
Information related to the printer setting is displayed on the LCD by pressing the [3] button.