Konica Minolta IP-011 - Manual (Page 47)

Chapter 3 Printer Driver
IP-011 Printer Controller 3-9
Back cover
By using [Paper] tab-[Back Cover], you can
perform the setting to use a designated tray for
printing the last page.
Select either [On] or [Off].
Default of Back Cover is [None].
When [On] is selected, select either [Blank] or
[Printed].
When [Blank] is selected, nothing is printed
on the back cover.
When [Printed] is selected, the last page is printed on a back cover.
The tray for the back cover is selected by using [Front/Back Cover]-[Paper Tray].
Back Cover can not be set in the following conditions:
•
When [B6R] is selected as a paper size,
•
When Alternate is set to [On],
•
When Duplex is set to [booklet], or
•
When Sort is set to [Group]
Capture printer port
When the device name and path are specified
on the [Capture Printer Port] dialog shown by
clicking [Details] tab-[Capture Printer Port]
button, a network printer can be allocated as a
virtual printer port.
In addition, when [Reconnect at Logon] of the
[Capture Printer Port] dialog is selected, a
virtual printer port is automatically reconnected
at log-on.
B
C
Back Cover [Off]
Back Cover
[On] [Blank]
Back Cover
[On] [Printed]
[Not indicated]