Konica Minolta IP-011 - Manual (Page 49)

Chapter 3 Printer Driver
IP-011 Printer Controller 3-11
Duplex printing
By using [Setup] tab-[Duplex], you can perform
settings of the Duplex printings.
You can select [1-Sided], [2-Sided Short Edge
Binding], [2-Sided Long Edge Binding] or
[Booklet] from the list shown by clicking the [ ▼ ]
button beside the [Duplex] box.
Default of the Duplex printing is [1-Sided].
When [1-Sided] is selected, only one side of
paper is printed.
[2-Sided Short Edge Binding], [2-Sided Long
Edge Binding] and [Booklet] can not be selected in the following conditions:
•
When [B6R] is selected as a paper size
[Booklet] can not be selected in the following conditions as well:
•
When other settings than [Letter], [Letter R], [Ledger], [A3], [A4], [A4R], [B4], [B5R] and [B5]
are selected as a paper size,
•
When Staple is set to other settings than [Off],
•
When Front/Back Cover is set, or
•
When Alternate is set to [On].
[2-Sided Short Edge Binding]
Prints paper so that the head
of the front becomes the foot
of the back.
[2-Sided Long Edge Binding]
Prints paper so that heads of
both sides become upward
[Booklet]
Prints paper so that booklets are
made when it is folded into two.
A
A B
A
A
B