Konica Minolta IP-011 - Manual (Page 15)

Chapter 1 Outline
1-4 IP-011 Printer Controller
● IP-011 Hardware Configuration
Basic Configuration
Configuration of the IP-011 is as follows:
Control board
CPU: Power PC 401 GF
Program memory: FLASH ROM
System memory: 16MB SD-RAM
Memory
The IP-011 is equipped with 16 MB memory as standard and can be expanded to 80 MB at the
maximum.
● I/O Interface
Parallel
Centronics (IEEE1284)/ amphenol 36 pin male connector
PCI Bus
Card Edge Type/20MHz/32bit
Ethernet (option)
100Base-T and 10Base-T
The optional KN-304 card is used to connect to the Ethernet. The KN-304 is the internal print
server card which supports multiple protocols on the Ethernet. This card includes a CPU and a
flash memory with an upgradable program.
The KN-304 supports the following network protocol.
•
IPX/SPX (NetWare)
•
LPD/LPR (TCP/IP)
•
Peer to peer (TCP/IP)
Refer to the corresponding operating manual for connection to the KN-304.