KTM 990 SUPER DUKE - Manual (Page 72)

Remove the right spoiler (see Refilling the engine oil) and unscrew the plug [6]. Add 2.5
liters (0.7 USgal) of fully synthetic engine oil meeting the JASO MA standard (e.g. Motorex
Power Synt 4T) and remount the plug. Start the engine and allow to run warm in neutral
until 4 bars on the temperature indicator light up. Switch off the engine and check the oil
level (see Checking the engine oil level).
Check the engine and the oil tank for oil leakage.
Fit the slots in the front spoiler on the lower screws [7] and tighten. Apply Loctite 243 to
the side screws [8] and tighten to 10 Nm.
Finally, mount the spoiler (see Refilling the engine oil).
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
71
6
7
8