Maintenance work on chassis and engine – KTM 990 SUPER DUKE User Manual
Page 64
To completely bleed the cooling system, the motorcycle must be raised approx. 50 cm (20
in) in the front.
Add cooling liquid until it runs out of the vent holes without bubbles and immediately mount
the screw to prevent air from entering the radiator.
Completely fill the radiator with cooling liquid. Mount the radiator cap and move the motor-
cycle into a horizontal position again. Now fill the compensating tank
[6] with cooling liq-
uid until it reaches a level between the MIN and MAX marks. Close the compensating tank
and mount both spoilers.
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
63
Remove the bleeder screw
[5] on the left side of the radiator.
5
6
See also other documents in the category KTM Motorcycles:
- 125 SX (48 pages)
- EXC-F 400 XC-W (68 pages)
- 400 EXC RACING (66 pages)
- 530 XCR-W USA (125 pages)
- Supermoto 40LC4-E (46 pages)
- 380SX (153 pages)
- 1190 RC8 JP (234 pages)
- 640 LC4 (50 pages)
- 990 SUPER DUKE R (92 pages)
- 50 SX PRO JUNIOR LC (35 pages)
- 125 SX (46 pages)
- EXC 200 EXC (70 pages)
- 690 ENDURO AUS/UK (179 pages)
- 400 (46 pages)
- XC 105 SX (42 pages)
- SUPERENDURO R 950 (40 pages)
- 990 ADVENTURE (102 pages)
- 200 (67 pages)
- 560 SMR 2006 (28 pages)
- 50 SX (42 pages)
- 85 SX (40 pages)
- 250 SX-F (70 pages)
- Super Duke 990s (52 pages)
- 525 SX (62 pages)
- 950 SUPERMOTO R (86 pages)
- 3CF6001G6EN (24 pages)
- 950 R (86 pages)
- Supermoto 640LC4 (46 pages)
- ENDURO 640 LC4 (60 pages)
- 85SX (42 pages)
- ENDURO SUPERMOTO 640 LC4 (60 pages)
- Supermoto 690 (165 pages)
- 950 SUPERMOTO (90 pages)
- 950 (86 pages)
- 300SX (56 pages)
- Supermoto 640 LC4 (40 pages)
- 3CF8403H0EN (28 pages)
- 50 SX JUNIOR (42 pages)
- 450 SMR (91 pages)
- 85/105 SX (42 pages)
- 3CF6001F5EN (20 pages)
- 300 XC 2008 (74 pages)
- XCF-W 250 EXC-F EN (63 pages)
- EXC 250 XC DE (69 pages)