Kodak i250 - Manual (Page 12)

A-61167 September 2002 7
Installing the Scanner
Site Specifications
Place the scanner:
• in a clean area with temperature and relative humidity typical of an
office environment
IMPORTANT: Only use the scanner and power supply indoors in a
dry location.
• on a stable, level work surface capable of supporting the following weights:
- i250 Scanner: 12.5 kg (27.5 lb.)
- i260 Scanner: 13.9 kg (30.5 lb.)
- i250 Scanner with optional flatbed accessory: 19.8 kg (43.5 lb.)
- i260 Scanner with optional flatbed accessory: 21.2 kg (46.5 lb.)
• within 1.52 metres (5 feet) of an electrical power outlet
NOTE: For more information about the scanner specifications, refer to
Appendix A, Specifications.
System Requirements Following is the minimum system configuration to run the i250 Scanner or
i260 Scanner.
NOTE: The actual performance of the system depends on the scanning
application, choice of scanning parameters, and the host computer
configuration. If the scanner is not performing at the optimal speed,
a faster computer and/or more RAM may be necessary to obtain the
rated throughput.
• IBM PC (or compatible) with a Pentium III 1GHz processor
• Microsoft Windows 98SE, Windows Me, Windows 2000, or Windows XP
• 100 MB of available hard disk space (200 MB is recommended)
• 128 MB RAM
• Monitor (VGA)
• Mouse