Kodak A-61557 - Manual (Page 24)

22 A-61557 December 2006
Scanning your
documents 1. Place the documents into the input tray of the scanner until the left
LED is lit. Be sure to slide the documents far enough forward so the
scanner can detect the documents.
NOTE: If checks do not sit flat in the paper path, the Paper Detect
LED may not recognize their presence. Be sure that the
checks are flat and not lifted at a slight angle.
The documents should be placed in the input tray facing away from
the scanner.
2. Using your application software, click Scan.
For i6060/i6090 Check Scanners:
The i6060/i6090 Check Scanners feature continuous feed, which
allows checks to be added to the feeder while scanning, maintaining
production.
For i6015 Check Scanner:
Insert the document into the Check Scanner until you can push it in no
farther. Wait until the scanner grabs the document before releasing it.