Loading the film, Battery-condition indicator – Konica Minolta I60c User Manual
Page 9
17
16
1. Slide the back-cover release
down to open the back cover.
• Before opening the back cover, look
through the film window to confirm that
film is not currently loaded.
LOADING THE FILM
• If the back cover does not open, turn the camera off and on to release the film-
chamber lock.
• Use only DX-coded 35mm film rated between ISO 25 and 3200.
• Do not use Polaroid instant 35mm film. Winding problems may result.
• ISO 400 film is recommended for best results.
• Always load and unload the film in subdued light.
Continued on next page.
The indicator briefly appears. Power is
sufficient for all camera operations.
The indicator blinks and no other
indicators are displayed on the data
panel. The shutter will not release.
Replace the battery immediately.
Each time the camera is turned on, an indicator will appear on the data panel to
indicate the power status of the battery.
The indicator blinks. Power is sufficient
for camera operation, but the battery
must be replaced soon.
BATTERY-CONDITION INDICATOR
GETTING STARTED