Kenwood KRF-V7070D - Manual (Page 22)

22 EN
ENGLISH
Normal playback
Make sure the SPEAKERS
indicators are turned off.
SPEAKER EQ mode
SPEAKER EQ function is to adjust the receiver’s audio output
characteristics with the speakers’ characteristics which differs depending
on the size of the speakers. Especially for the music sound source
playback, the reproduced sound becomes more natural when adjusting
the output characteristics. When activating the SPEAKER EQ function,
you will be able to enjoy a more natural and dynamic sound experience
even with small size speakers.
Press the SPEAKER EQ key to switch the following setting;
1 SPEAKER EQ SMALL : To select a small size speaker.
(The SPEAKER EQ indicator lights up.)
2 SPEAKER EQ NORMAL : To select an average size speaker.
(The SPEAKER EQ indicator lights up.)
3 SPEAKER EQ LARGE : To select a large size speaker.
(The SPEAKER EQ indicator lights up.)
4 SPEAKER EQ OFF : The SPEAKER EQ function is turned
OFF.
(The SPEAKER EQ indicator goes off.)
• “SPEAKER EQ” will scroll from right to left.
• SPEAKER EQ cannot be turned OFF when ACTIVE EQ is turned
ON.
• SPEAKER EQ function will not be available when REC MODE, AUTO
TUNING or PRESET MEMORY is ON, and during 96kHz LPCM
playback.
Listening with headphones
1 Press the A and B Speaker keys so that the speaker indicator
goes off.
• If you turn off all of the speakers when in surround mode, the surround
mode will be cancelled as well, resulting in stereo playback.
2 Connect headphones to the PHONES jack.
PHONES
3 Use the VOLUME CONTROL knob or VOL +/– keys to adjust
the volume.
SL S SB SR
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE DTS.
MATRIX
DISCRETE
DOLBY
PRO LO A B CLIP
AUTO DETECT
LFE