Kenwood KRF-V7070D - Manual (Page 15)

15 EN
ENGLISH
Connecting the antennas
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception.
AM antenna terminal connections
1 Push lever. 2 Insert cord. 3 Release lever.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
FM antenna terminal connections
Insert cord.
FM outdoor antenna
Lead the 75 Ω coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75 Ω terminal.
S VIDEO VIDEO L-AUDIO-R
AV AUX
S VIDEO OUT
S VIDEO cord
VIDEO OUT
AUDIO OUT
AM loop antenna
FM indoor antenna
Use an antenna
adaptor
(Commercially
available)
Attach to the stand
Setting up the system
Connecting to the AV AUX jacks
The AV AUX jacks are convenient for connection of video components
such as a camcorder or a video game.
• To select the source connected to the AV AUX jacks press AV
AUX key. )
• When you connect the audio source such as the MD player, you
do not need to connect the video cable.
• When you connect the unit and the component with the S
VIDEO cord, you can get better picture quality.
Camcorder, other
VCR, video game or
portable MD player
FM outdoor antenna
FM
75
GND
AM
ANTENNA