Editing channel list – Kathrein UFS 902 User Manual

Page 55

LOCKING CHANNELS

Use the

buttons to select the channel to be locked on the favourite list you have selected.

Press the

button to open the edit menu and use the

buttons to select the “Lock” function.

Confi rm the command by pressing the

button. You are now prompted to enter the PIN code

(factory default setting: 0000).

The channel you previously selected is now shown with a padlock to its right. In future this channel
can be viewed only by entering the four-digit PIN code.
The channel is also locked on all other channel lists. You need not additionally lock the channel in
the other channel lists.

This function can be restored again using the edit menu (select: “Unlock”).

RENAMING FAVOURITE LIST

Use the

buttons to select the favourite list to be renamed. Press the

button to open

the edit menu and use the

buttons to select the “Rename favoritelist” function. Confi rm the

command by pressing the

button. A keypad will now be displayed with which you can enter the

desired name alphanumerically using the number buttons on the remote control. See also the section
“Operating Instructions”, “Alphanumeric Entries”.

STARTING BLOCK MARKING (MARKING SEVERAL CHANNELS)

Use the

buttons to select the channel as the start point from which you want to select further

channels. You can only select channels that are listed in succession in your selected favourite list. Press

the

button to open the edit menu and use the

buttons to select the “Start Blockselection”

function. Now use the

buttons to highlight the desired channels, starting from the previously

highlighted channel and working upwards or downwards. The highlighted channels will be highlighted
in yellow and marked with a tick at the left side.

When you have highlighted the channels that you wish to select, press the

button to open the edit

menu once again and use the

buttons to select the desired function (“Remove from favoritelist”,

or “Unlock”).

The selected function can now be used in the same way as described for the respective items in
this section for a single channel.

EDITING CHANNEL LIST