First installation: lnb only – Kathrein UFS 902 User Manual
Page 18
18
FIRST INSTALLATION: LNB ONLY
user-defi ned:
If you choose not to use a universal LNB, you must here set the frequency ranges for which your LNB was
confi gured.
Use the
buttons to select the frequency range to be changed (low, high or limit frequency).
Use the
buttons or the number buttons to set the exact frequency for which your LNB was
confi gured.
Test transponder
To check whether the settings that you have made are correct, use the
buttons to move to the
“Test transponder” fi eld. Use the
buttons to select the various transponders. If your settings are
correct, you will see at the top right of the screen the live signal of a channel for the currently selected
transponder.
If you are not receiving a signal, check your settings again and if necessary call for expert help.
When you have fi nished confi guring the satellite, press the
!
(green) button. The receiver then
automatically opens the menu for the channel search. Continue with the section (Execute channel search).