Kathrein UFS 902 - Manual (Page 20)

20
Universal:
No further input is required, since all necessary frequency ranges are covered by a universal LNB.
Wideband:
No further input is necessary, since all frequency ranges are set by the Wideband LNB.
user-defi ned:
If you are not using a Universal or a Wideband system, you must set the frequencies here. You can fi nd
the necessary information in the documentation supplied with your system.
Use the buttons to select the frequency range to be changed (low, high or limit frequency).
Use the buttons or the number buttons to set the exact frequency for which your LNB was
confi gured.
When you have completed all setting for the currently selected satellite, press the button. If you
have selected more than one satellite, repeat the previous “Satellite and Position” and “LNB Type”
processes for the number of satellites you selected.
When you have completed the settings for all the satellites, the following display appears:
Use the button to select the next menu item “New registration” and press the button. The following
display appears:
FIRST INSTALLATION: One Cable
Use the buttons to select the type of installation you want and confi rm with the button.
For clarity, we have split further details into two sections.
Firstly we give details of “Automatic” installation, then details of “Manual” installation.