Sony 4-125-572-12 (1) - Manual (Page 13)

13
Activating the Network Features
P
re
par
a
tio
n
4 LAN connection among the
projector and computers
(Wireless Access Point)
For details on the configuration, see
“Configuring Using “Simple Setting” for
Wireless Access Point Connection” on
page 17.
Setting of the security features, such as Data
Encryption and authentication, may be
required according to your network
environment. We recommend that you contact
your network administrator before
configuration.
The configuration with Simple Setting uses a
wizard, which prompts you to answer to
questions step by step.
The wizard enables easier configuration,
since it suggests a successful configuration
method.
Use the menus to configure the settings, as the
configuration with Simple Setting is not
available in the following cases:
– When 802.1x Authentication of a
wireless LAN is required to be set
– When you want to make a Data
Encryption setting for an Ad-hoc (Peer-
to-peer) connection over a wireless LAN
– When you change Common Setting
items such as Projector Name and
Password
– When you initialize the Network Setting
Note
LAN
Access
point
Computer
Projector
Computer
About Simple Setting
Note