Samsung CLX-8540ND - Manual (Page 70)

6 .15
Forwarding a sent fax to other destination by
server
Note
If Forward to Email Setting is on, this option will be grayed out.
The server setting must be done in SyncThru™ Web Service
prior to this option on.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.5)
3 Press the Setup tab > Fax Setup.
4 Press down arrow on the right side.
5 Press Fax Forward Settings > Forward to Server Setting > Send
Forward
.
6 Press On.
7 Press OK.
Forwarding a received fax to other destination by
server
Note
If Forward to Email Setting is on, this option will be grayed out.
The server setting must be done in SyncThru™ Web Service
prior to this option on.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.5)
3 Press the Setup tab > Fax Setup.
4 Press down arrow on the right side.
5 Press Fax Forward Settings > Forward to Server Setting >
Receive Forward
.
6 Press Forward.
7 Press OK.
Setting up the end fax tone
The end fax tone that sounds to indicate that the fax has been received
can be turned on or off.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.5)
3 Press the Setup tab > Fax Setup.
4 Press down arrow on the right side.
5 Press Fax Ending Sound.
6 Press On.
7 Press OK.
Setting up receiving faxes in color
This function allows you to recieve faxes in color.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.5)
3 Press the Setup tab > Fax Setup.
4 Press down arrow on the right side.
5 Press Rx Color Printing.
6 Press On.
7 Press OK.