Samsung CLX-8540ND - Manual (Page 46)

5 .2
• Auto Crop: Prints only the image of an original after cropping the
blank parts like the margin. (Page 5.9)
• Multi-Bin: Allows you to select the output mode. (Page 5.10)
Image tab
• Erase Edge: Allows you to erase punch holes, staple marks, and
fold creases along any of the four documents edges. (Page 5.10)
• Erase Background: Prints an image with no background.
(Page 5.11)
• Margin Shift: Creates a binding edge for the document.
(Page 5.11)
• Scan Enhance: Use this feature for the better quality of copy-
output. (Page 5.11)
• Adjust Backside Image: Allows you to copy and image and
remove the back-side image shown through. (Page 5.11)
Copying originals
This is the normal and usual procedure for copying your originals.
1 Press Copy from the Main screen.
2 Place originals, face up, in the DADF, or you can use the scanner
glass with a single original document face down.
3 Adjust the settings for each copy such as Original Size, Reduce/
Enlarge
, Duplex and more. (Page 5.3, Page 5.3)
4 Select the tray by pressing the appropriate tray on screen.
5 Enter the number of copies using the number keypad, if necessary.
6 Press Start on the control panel to begin copying.