Samsung CLX-8540ND - Manual (Page 34)

3 .6
3 When the login message appears, enter password with number
keypad and press OK. (Page 3.5)
4 Press the General tab > Date & Time > Date&Time.
5 Select date and time using left/right arrows. Or touch the insert area
and use the numeric keypad on the control panel.
6 Press OK.
Note
To change the format of date and time, press Date Format and
Time Format
.
Changing the display language
To change the language that appears on the display, refer to the following
steps.
1 Press Machine Setup on the control panel.
2 Press Admin Setting.
3 When the login message appears, enter password with number
keypad and press OK. (Page 3.5)
4 Press the General tab.
5 Press the down arrow to switch the screen and press Language.
6 Select the desired language.
7 Press OK.
Setting job timeout
When there is no input for a certain period of time, the machine exits the
current location. You can set the amount of time the machine will wait.
1 Press Machine Setup on the control panel.
2 Press Admin Setting.
3 When the login message appears, enter password with number
keypad and press OK. (Page 3.5)
4 Press the General tab.
5 Press Timers.
6 Select System Timeout.
7 Select On.
8 Select a duration using left/right arrows.
9 Press OK.
Using power saving feature
The machine provides power saving features.
1 Press Machine Setup on the control panel.
2 Press Admin Setting.
3 When the login message appears, enter password with number
keypad and press OK. (Page 3.5)
4 Press the General tab.
5 Press down arrow to switch the screen, press Power Saver.
6 Select appropriate option and time.
• Low Power Save: Keeps the temperature of the fuser unit under
100 °C, and turns off the fans within the machine except a core fan
for the fuser unit.
• Power Save: Turns off all the fans even for the fuser unit after
certain time.
• Auto Wake: The machine automatically wakes up from the power
save mode on the time you have set.
7 Press OK.
Setting the default tray and paper
You can select the tray and paper you would like to keep using for printing
job. (Page 12.2)
1 Press Machine Setup on the control panel.
2 Press Admin Setting.
3 When the login message appears, enter password with number
keypad and press OK. (Page 3.5)
4 Press the General tab.
5 Press the down arrow to switch the screen and press Tray
Management
.
6 Select tray and its options such as paper size and type.
7 Press OK.