Chapter 7. service precaution, Error code table, Conditions for soldering circuit parts – Sharp ER-A440 User Manual
Page 33
CHAPTER 7. SERVICE PRECAUTION
1. Error code table
When the following error codes are displayed, press the key and take a proper action according to the table below.
Error
code
Error status
Action
E01
Registration error
Make a correct key entry.
E02
Misoperation error
Make a correct key entry.
E03
Undefined code is entered.
Enter a correct code, or declare it by the programming.
E04
Paper empty
Replace a journal paper roll with a new one.
E05
Secret code error
Enter a correct secret code.
E07
Memory is full.
Expand the file within a capacity of memory.
E11
Compulsory depression of the
i
key for direct finalization
Press the
i
key and continue the operation.
E12
Compulsory tendering
Make a tendering operation.
E26
File type error
Create files correctly.
E27
Power-off
E31
Compulsory non-add code entry
Enter a non-add code.
E32
No entry of your cashier code
Make a cashier code entry.
E33
The current cashier code should not be changed.
Change a cashier after finalizing the transaction.
E34
Overflow limitation error
Make a registration within a limit of entry.
E35
The open price entry is inhibited.
Make a preset price entry.
E36
The preset price entry is inhibited.
Make an open price entry.
E37
The direct finalization is inhibited.
Make a tendering operation.
E39
Power-off during validation printing
Print a validation again.
E67
Registration buffer is full.
E76
The drawer is still opened.
Close the drawer.
E86
Communication error
E87
Data format error
E88
Time-out error
E94
Age verification error
The dept./PLU is protected by the age limitation.
2. Conditions for soldering circuit parts
To solder the following parts manually, follow the conditions described below.
PARTS NAME
PARTS CODE
LOCATION
CONDITIONS FOR SOLDERING
Front LED
(HDSP5621)
Front LED PWB: FND1-5
315°C/2 sec.
Pop-up LED
(HDSP-F501#S02)
Pop-up LED PWB: FND1-10
315°C/2 sec.
7 – 1