Assembly instructions – Stamina Products 55-2065 User Manual

Page 8

background image

ASSEMBLY INSTRUCTIONS

8

STEP 5

Connect the

LOWER CONNECTION WIRE(30)

to

UPPER CONNECTION WIRE(31).

Insert the

UPRIGHT(4)

into the

MAIN FRAME(1)

and secure with

SOCKET HEAD BOLTS(M8 x 25mm)(70),

SOCKET HEAD BOLTS(M8 x 50mm)(71),

and

LOCK WASHERS(M8)(88).

The opening in the channel on the

UPRIGHT(4)

must be facing toward the back as shown.

If necessary, loosen the mounting

SCREWS(M4 x 20mm)(76)

for the

LEFT

and

RIGHT

UPRIGHT COVERS(13, 14)

to provide additional space for the

UPRIGHT(4).

Re-tighten these

screws after the

UPRIGHT(4)

is assembled.

NOTE:

HINT:

STEP 6

Connect the

RIGHT PIVOTING ARM(94)

to the

PEDAL SLIDER(51)

by attaching the

RIGHT SLIDER

CONNECTOR(92)

onto the

PEDAL SLIDER(51)

with

NYLOCK NUTS(M8)(85).

Repeat on the left

side.