Samsung DVD-R125 - Manual (Page 43)

English - 43
R
ecording
5 Press the REC button.
To pause recording
Press the button to pause a recording in progress.
● Press the button again to resume
recording.
● You can switch channels by pressing the PROG
( / ) buttons while recording pauses.
To stop recording
Press the STOP ( ) button to stop or finish a
recording in progress.
● When using DVD-RAM/DVD-RW/DVD-R discs, the
message ‘Updating the information of disc.
Please wait for a moment’ is displayed.
Recording from external
equipment you are
watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1 Press the OPEN/CLOSE button, place a
recordable disc on the disc tray.
2 Press the OPEN/CLOSE button to close
the disc tray.
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to
format or not will be asked first. (See page 40)
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 40)
3 Press the INPUT button to select the input
source according to the connection you
made.
The front panel display changes in the following
sequence:
➞ PR Number ➞ AV1 ➞ AV2 ➞ AV3 ➞ DV
If you connect a digital camcorder, press the
INPUT button to select DV. (See page 44)
4 Press the REC MODE button repeatedly,
(or press the REC MODE button, then
press the …† button) to select the
recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
Before you start
Record Mode SP (02:12)
■ You can not change the recording mode
and input source while recording or
Pause.
■ Recording will stop automatically if
there is no free space left for recording.
■ Up to 99 titles can be recorded onto a
disc.
■ Recording will stop automatically if a
copy protected image is selected.
■ DVD-RAM/DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.
■ Do not use DVD-R authoring discs with
this DVD recorder.
NOTE
00842A-R125-XEU_41~50 6/7/05 7:53 PM Page 43