Samsung DVD-R125 - Manual (Page 36)

36 - English
S
ystem Setup
Display(Video) Options
This function depends on disc type. It may not work for
some disc types.
TV Aspect
Depending on the type of television you have, you may
want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD
supplies, even though you have a TV
with a 4:3 ratio screen.
Black bars will appear at the top and
bottom of the screen.
• 4:3 Pan - Scan : Select this for conventional size TV
when you want to see the central
portion of the 16:9 screen. (Extreme left
and right side of movie picture will be
cut off.)
• 16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
3D Noise Reduction (motion adaptive noise
reduction)
● On : Provides a clear picture through noise
reduction (for recording).
● Off : Normal
RETURN OK MOVE EXIT
Video No Disc
TV Aspect : 16:9 Wide √ √
3D Noise Reduction : Off √ √
HDMI/DVI Resolution : 576P √ √
Video Output : Component √ √
Programme
Setup
4:3 Letter Box
4:3 Pan-Scan
16:9 Wide
RETURN OK MOVE EXIT
Video No Disc
TV Aspect : 16:9 Wide √ √
3D Noise Reduction : Off √ √
HDMI/DVI Resolution : 576P √ √
Video Output : Component √ √
Programme
Setup Off
On
HDMI/DVI Resolution
This setting is used when the DVD recorder is connected
by HDMI or DVI with Display devices (TV, projector, etc).
• 576p : 720 x 576
• 720p : 1280 x 720
• 1080i : 1920 x 1080
Output selection
• Connect the DVD Recorder to your TV via HDMI.
Set your TV's input to HDMI.
• Press the P.SCAN button while the unit is in Stop mode
to select the HDMI output resolution as follows:
576p
→ 720p → 1080i.
RETURN OK MOVE EXIT
Video No Disc
TV Aspect : 4:3 Letter Box √ √
3D Noise Reduction : Off √ √
HDMI/DVI Resolution : 576P √ √
Video Output : Component √ √
Programme
Setup
■ Progressive scan automatically activates
when HDMI is connected.
■ There will be no HDMI video and audio
outputs unless progressive scan function
is activated.
■ Consult your TV User’s Manual to find out
if your TV supports Progressive Scan.
If Progressive Scan is supported, follow
the TV User’s Manual regarding
Progressive Scan settings in the TV’s
menu system.
■ If Video Output is set incorrectly, the
screen may be blocked.
■ The resolutions available for HDMI/DVI
output depend on the connected TV or
projector. For details, see the user’s
manual of your TV or projector.
■ When the resolution is changed it may
take a few seconds for a normal image to
appear.
■ If you set the HDMI output resolution
720p or 1080i, HDMI output provides
better picture quality.
■ DivX playback screen output can only be
done in 576p.
NOTE
576p
720p
1080i
■ Menu screen will zoom out to 2/3 at
1080i.
NOTE
00842A-R125-XEU_17~40 2005.6.28 1:57 AM Page 36