Samsung DVD-R125 - Manual (Page 34)

34 - English
If the TV supports Progressive Scan, press the P.SCAN
button on the front of the DVD Recorder to enjoy.
1 With the unit in Stop mode, press the
P.SCAN button on the front of the DVD
Recorder.
The message “Press [Yes] to confirm Progressive
scan mode. Otherwise press [No]” will appear.
Press the
œ √ buttons to select Yes, and then press
the OK button.
2 The message “Please set your TV to
Progressive input
. To deactivate, press
[STOP] key.” will appear. Press the OK button.
3 The message “Video Output Mode
Progressive Scan” will appear.
Setting up the Progressive
scan
■ When the HDMI cable is connected, this
screen is not displayed.
■ Progressive setting is only available when
the Video Out is set to Component.
■ Progressive setting is only available when
the DVD recorder is in stop mode.
■ If the P.SCAN button on the DVD
recorder’s front panel is pressed during
playback, the message “This function is
possible only on stop mode” appears on
the screen.
NOTE
Press [Yes] to confirm Progressive scan mode.
Otherwise press [No]
Yes No
Please set your TV to Progressive input .
To deactivate, press [STOP] key.
OK
Video Output Mode
Progressive Scan
S
ystem Setup
4 Press the …† buttons to select Video
Output, then press the OK or √ button.
5 Press the …† buttons to select the desired
item, then press the OK or √ button.
In Component mode, you can set video output to
Progressive(P.SCAN) or Interlace, see page 35.
When the HDMI cable is not connected, available video
output jacks are as follow.
Available Video Output Jack
RETURN OK MOVE EXIT
Video No Disc
TV Aspect : 16:9 Wide √ √
3D Noise Reduction : Off √ √
HDMI/DVI Resolution : 576p √ √
Video Output : Component √ √
Programme
Setup
Component
RGB
Component Select this when the Recorder is connected
to a TV with Component jack.
RGB Select this when the Recorder is connected
to your TV using SCART cable.
Component Output
(Y, Pb, Pr)
AV1 Scart
R, G, B
Composite
X
O
X
O
O
O
O
(TV in progressive mode)
X
X
X
X
X
O
X
O
O
O
O
AV2 Scart
Composite Video out
S-Video out
Composite
Setting mode
RGB Mode
Output jack P.SCAN off mode (Interlace mode) P.SCAN on mode
Component mode
■ When the HDMI cable is connected, other
A/V output does not operate.
NOTE
00842A-R125-XEU_17~40 2005.6.28 2:46 AM Page 34