Sharp Electronic Cash Register XE-A402 User Manual

Page 13

Now you are ready for sales registration.

Starting sales entries

• Text programming for clerk name, department items, PLU/subdepartment and UPC/EAN items, logo

messages printed on the top or bottom of receipts, function texts and foreign currency symbol

• Bottle return department
• Split pricing entry

This is not factory preset. You must enable this function.

• Foreign currency conversion rate

You must set a conversion rate to use the conversion key.

• Preset unit price for departments, PLU/UPC/EANs
• Preset amount for

• Preset rates for

% &

You do not have to program these preset prices/amount/rates since they can be entered at
registration.

• Amount entry digit limit for PO amount, RA amount, Manual tax amount

The factory setting makes the maximum amount you can enter. You can program to limit the amount.

• Sentinel - High amount lockout (HALO) for cash in drawer (CID)
• Department group

You can classify departments into a maximum of 9 groups (0 to 9 groups: 0: non-group is assigned).
Sales in each group can later be printed on an individual group total report and full group total report.

• Commission

If you program commission rate (up to two) and classify departments (For PLU/subdepartment/
UPC/EANs, their commission rates are relied on their associated departments.) into commission
groups (0 to 2 groups: 0: non-commission), commission sales and amount in each commission group
can later be printed on an individual and full clerk report.

• Key sequence for AUTO key
• Serial/Scanner port programming
• Specification of clerk to be trained

Department programming:
The cash register is pre-programmed for departments as follows:
Department: Allow open price entry in normal department (group: 0, commission group: 0), taxable status-

taxable 1 for department 1 to 10, and non taxable for department 11 to 99

When you use department 11 or above, and/or you apply taxable status other than taxable 1 for department 1 to
10, you must change department settings. Please refer to the department programming section for
programming details.