Operations, General, Basic.controls – Woodstock W1770 User Manual
Page 33
-31-
W1770 21" Bandsaw w/Foot Brake
O
PE
R
ATIO
NS
OPERATIONS
General
This machine will perform many types of operations
that are beyond the scope of this manual. Many of these
operations can be dangerous or deadly if performed incor-
rectly.
The instructions in this section are written with the under-
standing that the operator has the necessary knowledge
and skills to operate this machine.
If.at.any.time.you.are.
experiencing.difficulties.performing.any.operation,.stop.
using.the.machine!
If you are an inexperienced operator, we strongly rec-
ommend that you read books or trade articles, or seek
training from an experienced bandsaw operator before
performing any unfamiliar operations.
Above. all,. your.
safety.should.come.first!
READ.and.understand.this.entire.instruc-
tion.manual.before.using.this.machine..
Serious. personal. injury. may. occur. if.
safety.and.operational.information.is.not.
understood. and. followed.. DO. NOT. risk.
your.safety.by.not.reading!
Basic.Controls
Refer to
Figures.45–47.and the desriptions below to
become familiar with the basic controls and components
of your bandsaw.
Control.Panel
Power.Switch: Disables the ON and OFF button when the
key is turned to the "0" position. Enables ON and OFF but-
ton when the key is turned to "1" position.
ON.Button: Starts motor only if the OFF button is popped
out and power switch key is turn to "1" position.
OFF.Button: Disables the ON button. Enable the ON but-
ton by twisting the OFF button until it pops out.
Figure 45. W1770 control panel features.
On Button
Off Button
Power Switch
Key