Woodstock W1770 - Manual (Page 32)

-30-
W1770 21" Bandsaw w/Foot Brake
SE
TU
P
Installing.Resaw.Fence
To.install.the.resaw.fence,.do.these.steps:
1. Install the resaw fence lock handle (with the washer
and moving plate) onto the fence, then slide the
resaw fence over the moving plate, as shown in
Figure.43.
. Note: Leave the moving plate and lock handle loose
enough to slide on the resaw fence.
2.. Tighten the resaw lock handle.
3.. Loosen the fence lock knob and place the fence
assembly on the rail, as shown in Figure.44.
4. Tighten the fence lock knob to lock the fence assem-
bly in place.
Figure 43. Attaching resaw fence to
standard fence.
Resaw Fence
Moving Plate
Resaw Lock
Handle
Figure 44. Resaw fence installed.