SMC Networks BLW-54MF - Manual (Page 70)

65
3
Chapter 3 Advanced Setup & Configuration
12.After JumpStart does the auto-detection, it will ask you to set a
password for adding devices to your network. And this password
will become the Pre-shared Key for GW-US54SG and BLW-54MF.
Meanwhile, the wireless authentication mode of BLW-54MF will
become ņWPA-AUTOŇandņPSKŇautomatically. ClickņNextŇto
complete the settings.
13.The following screen shows and it means GW-US54SG has
successfully connect with BLW-54MF. Click ņFinishŇto complete the
settings.