SMC Networks BLW-54MF User Manual
Page 58
53
3
Chapter 3 Advanced Setup & Configuration
œEnabledĈYou can choose toņEnabledŇorņDisabledŇthis
function.
œNameĈIf you want to add a new server and its collocated port number,
please enter a service name here.
œProtocolĈYou can set the protocol of the virtual server to be TCP or
UDP.
œPrivate PortĈEnter the port number that you want to set for virtual
server port which might be different from the external port number.
It can be a single port number or a range of ports. When receiving an
incoming packet corresponding with the specific port number, the packet
will be transferred to the appointed port.
œPublic PortĈEnter the port number used for Internet application, for
example, port 20 which is usually used for FTP, port 80 for WWW, and
so on. If applications require multiple ports, you should assign a range of
port for it.
œLAN ServerĈPlease enter the IP address of the server on the LAN side
which provides virtual server service.
œAddĈClick this button to add a server, and the server will be listed on
the list under the page.
œUpdateĈUpdate the modification you have made to the Virtual Server
function.
œDeleteĈDelete the Virtual Server you set before.
œCancelĈIf you do not want to do this setting right now, you may click
this button to exist.