SMC Networks BLW-54MF - Manual (Page 14)

2
9
Chapter 2 Basic Setup & Configuration
2. ņMS-DOSŇwindow will appear.
3.Type ņipconfigŇafter the command ofņc:>Ňand then press enter.
4.MS-DOS will appear your NIC address in the window, please take notice
of the value of ņIP AddressŇandņDefault Gateway.Ň
5.The value of ņDefault GatewayŇis the IP address of BLW-54MF.
œWindows2000/XP
1.Please make sure that you do have the authority to access as an
ņAdministratorŇor you are already one of theņSystem Administrators.Ň
2.Click ņStartƖProgramsƖAccessoriesƖCommand PromptŇor
ņStartƖRunĀ,Ňand then type inņcmd.exeŇand press enter.
3.It will appear a ņMS-DOSŇwindow.
4.Type ņipconfigŇafter the command ofņc:>Ňand then press enter.
5.MS-DOS will appear your NIC address in the window, please take notice
of the value of ņIP AddressŇandņDefault Gateway.Ň
6.The value of ņDefault GatewayŇis the IP address of BLW-54MF.
œLinux / Unix-Like
1.At first please make sure that your NIC are already enabled and works
properly.
2.And be sure you have ņrootŇnumber or your already are one of the
members of a ņrootŇgroup.
3.Please type ņifconfigŇofņifconfig -aŇafterņ#Ňand then press enter.
4.It will appear your present NIC address in the window, please take notice
of the value of ņIP AddressŇandņGateway.Ň
5.The value of ņGatewayŇis the IP address of BLW-54MF.
If you can get ņIP AddressŇandņGateway,Ň normally, it means that
you may use web browser to configure BLW-54MF. Type your destination
ęņhttp://192.168.1.1Ň (default IP Address of BLW-54MF) on the
Address Bar in the web browser. If you have changed the default IP
Address of BLW-54MF, please type in the new address on the address bar.